• Spyder Mr2 Paintball Gun

Disconnect the fuel filler and vent hoses from under the car. The fuel filler spout has a built in one way valve.

It's a lot easier if you do this when you are low on fuel. It also helps if you have a lift. Get some help and unbolt and remove the fuel tank.

Spyder Mr2 Paintball Gun

Convertible Tops > Toyota MR2 Spyder Convertible Top (2000-2007) Toyota MR2 Spyder Convertible Top. * This top comes completely assembled and ready to install. Mr2 Spyder Convertible Top Installation Instructions TOYOTA MR2 Spyder Spider Convertible Soft Top & Glass Window Black Pinpoint Installation instructions: a. Aug 26, 2012 Visit www.autotops.net to buy the full DVD. How to install a convertible top on a Toyota MR2. The full video.

The coolant and air conditioning lines are very close and require some manipulation. Be careful not to break a line. Get some help, watch the convertible top and set the bar in place.

Align the upper brackets on the main hoop with the shoulder harness guide attachment points. Start but do not tighten the bolts included with the bar. Don't forget the fancy trim cap washers. Make sure the bar is sitting all the way down.

Using the mounting plates as a guide drill 3/8' holes through all of the bolting locations. Don't drill into hoses or wires!! From under the car, using a jig saw with a metal cutting blade or rotary cutter open a slot on either side of the fuel tank cavity as shown to install the front lower back up plates. Be careful not to cut too far forward as you can cut through the front of the cross brace. You can leave one side attached to make it easier to seal the opening when you're finished. Slide the back up plates through the slots, have a helper install the bolts, start and snug the nuts but do not tighten.Attach the rear lower main hoop back up plates as shown but do not completely tighten them yet.